Instruction manual

Index of contents
2
Declaration of Conformity
Copied from CE Certificate
The undersigned, George N. Sifonios authorised by
META INTERNATIONAL CO., LTD. NO. 38-46, YA TAN
Rd., TA YA HSIANG. TAICHUNG HSIEN, TAIWAN, R.O.C.
Model Number BDS-612 (Sander)
Manufactured by META INTERNATIONAL CO., LTD. is
in compliance with the standards determined in the
following Council Directive.
Applicable Directive:
2006/42/EC (amending 98/37/EC)
Applicable Standards:
EN ISO 12100-1:2003, EN ISO 12100-2:2003,
EN 60204-1:2006
Warning
The symbols below advise that you follow
the correct safety procedures when using
this machine.
Fully read manual
and safety instructions
before use
Eye protection
should be worn
Ear protection
should be worn
HAZARD
Motor gets hot
Dust mask
should be worn
Index of Contents 02
Declaration of Conformity 02
What’s Included 03-04-05
General Instructions for 230V Machines 06
Specific to Sanding Machines 07
Specification 08
Assembly 08-09-10-11-12
Identification and Description 13-14
Setup/Adjustments 15-16-17
Operation Instructions 17
Sanding Configurations 17
Changing the Abrasive Disc and Belt 18-19
Maintenance 20
Troubleshooting 20
Parts Breakdown/List 21-22-23-24-25
Wiring Diagram 26
Notes 27