Instruction manual

ManualsBrandsAxminster ManualsDrillD.R.O. Micro Drill

526

Multi-Tools

axminster.co.uk/signup for our exclusive email offersCall 03332 406406

A top quality mains powered tool

for grinding, cutting, polishing,

engraving and carving.

The tool can be used in a number

of ways: hand held with drills,

grinding burrs, etc. mounted in the collet, with tools mounted in

the drilling head on the end of the ﬂ exible shaft and as a power

carver with the carving head on the ﬂ exible shaft. Note that the

reciprocating carver only ﬁ ts onto the ﬂ exible shaft, not onto the

main power unit. This 125W unit has a speed range from 5,000-

30,000rpm so the correct speed can be selected for the material

being worked on.

Supplied in a robust carrying case, the kit consists of the

main power unit ﬁ tted with a 3.2mm collet, ﬂ exible shaft with

precision rotary hand piece and chuck, reciprocating carving

head to ﬁ t onto the shaft, ﬁ ve carving tools, ﬁ ve grinding

burrs, two engraving points, shaft locking pin and chuck

removal spanner.

Model AMT

Rating Trade

Power 125W

Speed 5,000-30,000rpm

Chuck Cap/Type 3.2mm collet

Multi-Tool Kit £119.94 £99.95 340029

Inc.vat Ex.vat Code

Axminster AMT

Multi-Tool Kit

Model FBS 240/E

Rating Trade

Power 100W

Speed 5,000-20,000rpm

Chuck Cap/Type 0.3 to 3.2mm keyless

Weight 450g

This 100W multi-tool has a keyless chuck (0.3-3.2mm) to accept a

wide range of accessories, well balanced and with variable speed

for maximum control. The tool is well designed and the two inset

rubber grips on the body ensure a good purchase, important

for ﬁ ne detail work. The permanent magnet motor is powerful

and well balanced and the variable speed control gives a range

of 5,000 to 20,000rpm. At the opposite end to the drill chuck is a

hanging loop, used when the tool is coupled up to a ﬂ exible shaft.

This tool has a quality speciﬁ cation, a ﬂ exible drive shaft with

precision handpiece and 1.0mm, 2.4mm and 3.0mm collets is also

available as an optional extra. Supplied in a plastic storage case

with 43 cutting, grinding, drilling and sanding accessories.

FBS240/E Drill Grinder 230V £60.95 £50.79 410475

Flexi-Shaft £29.94 £24.95 300150

Inc.vat Ex.vat Code

Proxxon FBS 240/E Precision

Drill/Grinder Multi-Tool

Model IB/E

Rating Industrial

Power 100W

Speed 5,000-20,000rpm

Weight 500g

A very precise and accurate heavy duty mini-tool drill with an aluminium motor

casing and variable speed (5,000-20,000rpm) suited to professional use in the

workshop. The aluminium casing dramatically reduces any potential bearing

problems resulting in an exceptionally smooth and vibration free tool. Please

note that this unit will not accept a keyless chuck.

Supplied in a carrying case with 30 accessories and full set of six collets

from 0.8mm to 3.2mm.

IBS/E 28481 Mini Drill Grinder 230V £92.94 £77.45 300121

Inc.vat Ex.vat Code

Proxxon IB/E Professional Drill/Grinder

Dremel 3000 1/25 Rotary Tool,

Flex Shaft + 25 Accessories

A truly universal kit, Dremel 3000 high speed tool is supplied

complete with a ﬂ exible shaft and 25 accessories packed into a

strong storage case. Covering a very large range of projects, these

precise tools have a slim grip for easy control and can cope with

a host of tasks: engrave, cut, grind, carve, sand, polish and route.

A very large range of accessories is available. The main feature is

the EZ Twist™ nose cap to tighten and loosen collect (no spanner

required) ensuring a positive lock, whilst variable speed offers great

control for whatever task the tool is put to. The ﬂ exible shaft allows

ﬁ ngertip control with precision for detailed work and hard to reach

places. With an overall length of 1070mm and 127mm bend radius

it simply attaches to the 3000 tool. 2 year warranty. Accessories

include a SpeedClic system, cutting, polishing and grinding tools.

The kit is supplied

with 25 accessories,

Dremel ﬂ ex shaft and

storage case.

Model 3000 1/25

Rating Hobby

Power 130W

Speed 10,000 - 33,000rpm

Chuck Cap/Type Collet (0.8, 1.6, 2.4 and 3.2mm)

Weight 510g

3000 1/25 Multi Tool, Flexi Shaft

and 25 Accessories 230V £64.94 £54.12 501889

Inc.vat Ex.vat Code

19_Modelling Tools 525.indd 526 29/11/2013 15:02

Summary of content (20 pages)

PAGE 1
Multi-Tools Proxxon FBS 240/E Precision Drill/Grinder Multi-Tool Axminster AMT Multi-Tool Kit A top quality mains powered tool for grinding, cutting, polishing, engraving and carving. The tool can be used in a number of ways: hand held with drills, grinding burrs, etc. mounted in the collet, with tools mounted in the drilling head on the end of the flexible shaft and as a power carver with the carving head on the flexible shaft.
PAGE 2
Line a Dremel 4000JE 4/65 Multi-Tool with 65 Accessories For more intense work, the high power 175W 4000 Series Dremel has to be one of the most controllable speed rotary tools, with a separate on/off switch and electronic feedback mechanism that ensures the speed remains at the set level and does not drop off dramatically, as soon as the load is applied. The variable speed (5,000-35,000rpm) allows for sanding operations at the lower speeds and the use of very fine grinding points at the higher speed.
PAGE 3
Multi-Tools Axminster Heavy Duty Flexible Drive Unit Axminster Heavy Duty Flexible Drive Unit Handpieces Small with Collets A heavy duty flexible drive shaft unit for the serious carver, modeller or pattern maker, powered by a 300W input - 150W output, continuously rated motor. The speed is variable over a range of 0-20,000rpm and is controlled by means of a convenient foot pedal.
PAGE 4
Multi-Tool Accessories & Kits Dremel 575 Right Angle Drive Exactly what the description says it is, a right angle drive to fit on the end of a Dremel tool. Well made using spiral gears and ball races, the drive allows much greater versatility of the power tool and improves accessibility for many applications. Maximum speed is 37,000rpm. Inc.vat Ex.vat Code Right Angle Drive £27.44 £22.87 410185 0-3.2 mm Keyless Chuck A 0-3.2mm keyless chuck for the Dremel Multi-Tools and Axminster AMT.
PAGE 5
Multi-Tool Kits Dura-GRIT Proxxon TCT Rasps Sculpting, cleaning and smoothing of wood and fibre glass. Precision working on and refining of flutes, grooves and furrows. Extremely sharp and very easy to handle. The material can be worked without physical effort no matter whether it is cut with or against the grain. High stability and easy to clean with a blow torch flame. Also for use on rubber, foam and silicone. Working speed range 5,000 ~ 20,000rpm, 3.2mm shank. Not for use on metal. Inc.
PAGE 6
Multi-Tool Accessories Section Proxxon Silicon Carbide Grinding Points - Packs 2 For grinding hard and soft metals. Suitable for brittle materials such as glass, ceramics, porcelain and gem stones. 2.35mm(3/32”) shanks. Pack of two. 2.5mm (2) Proxxon Felt Polishing Tips Inc.vat £1.85 Ex.vat £1.54 Code 202325 Proxxon Silicon Carbide 22mm Grinding Wheels - Pack 2 Proxxon Flexible Polishing Tips For grinding hard and soft metals.
PAGE 7
Multi-Tool Accessories Proxxon 230V Power Tools Proxxon MBS 240/E Micro-Bandsaw The MBS 240/E has a solid, ribbed die-cast aluminium housing and features double ball bearing aluminium pulleys. Its sturdy, machined table with slot for mitre gauge measures a generous 200 x 200mm. The table tilts through 45° for accurate mitre sawing. The machine is powered by a low noise 230 Volt motor (high quality, for quiet, prolonged use) with toothed belt drive.
PAGE 8
Multi-Tool Accessories Section Proxxon FET Table Saw Proxxon KS 230 Saw A small, precise mains driven modelling saw with an 8mm depth of cut using the standard 58mm diameter blade. It has a fully machined aluminium table top some 160 x 160mm mounted on a sturdy ABS base, and comes with a mitre fence and rip fence. There are two blades available for different materials. There is a 34mm diameter dust extraction port at the rear of the machine.
PAGE 9
Proxxon Section 230V Power Tools Proxxon KG 50 Cut-Off Saw Accurately cuts small items of metal, wood and plastic. Table movable through 45°, allowing mitre cuts. Workpiece is fastened tightly and accurately by means of the integrated clamping device. Clamp jaws 27mm wide and maximum workpiece diameter 20mm. Depth of cut to 13mm. A special slot is provided to clamp H0 model tracks. The fence accepts lengths up to 140mm.
PAGE 10
Proxxon 230V Power Section Tools Proxxon DB 250 Micro Woodturning Lathe Turning in miniature is a pleasing hobby. This precision made wood lathe is fitted with electronic speed control. The ball bearing spindle is bored through at 10mm, for series production of small parts. The stable tool rest is adjustable in all directions. Powerful drive motor with speed control between 1,000 and 5,000rpm. Bed is made from stable, thick-walled aluminium profile. A faceplate for turning larger items is included.
PAGE 11
Proxxon 230V Power Tools Proxxon MICROMOT MB 140/S Drill Stand Fitted with optional TCT Rasp Proxxon LWS Long Neck Angle Grinder For working with steel, non-ferrous metals, glass, ceramics, wood and plastic. For cutting, rough machining, grinding, precision polishing, fine polishing and carving wood. With 50mm diameter discs, it features a specially balanced, 100W powerful, quiet and long lasting DC motor.
PAGE 12
Proxxon MICROMOT 12V Power Tools Proxxon MICROMOT 50/E Drill/Grinder 12V Proxxon PS 13 Pensander 12V The PS 13 Pensander from Proxxon is a great tool for the model maker and miniaturist. It is ideal for working on surfaces in recesses, slots and other awkward to get at areas. The durable special DC motor is housed in a glass fibre reinforced polyamide casing and the unit features a sanding stroke with a linear action, not rotational.
PAGE 13
Storage Modelling Knives & Cutting Tools No. 10 No. 10A No. 11 No. 15 Swann Morton Scalpel Blades Blades to fit all scalpel handles and Retractaway. Blades supplied in packs of five, selected blades in packs of 100. Aluminium Watchmaker’s Cases Originally these were designed to store small watch parts, jeweller’s findings or gems. These glass lidded aluminium containers are just as useful for storing all manner of small bits or parts. The glass top makes the contents identifiable at a glance.
PAGE 14
Axminster Proportional Dividers Axminster Rotary Cutter A handy little cutter which will produce tear-free cuts in a variety of thin and fragile materials, including paper, card and fabrics. Can be used freehand or with a straight edge. Rotary Cutter Replacement Blade Inc.vat £5.84 £2.64 Ex.vat £4.87 £2.
PAGE 15
Measuring & Marking Pyrography Antex Fire Writer Pyrography Kit Axminster Woodburning Pen Axminster Cutting Mats A range of heavy duty cutting mats made of multi layer PVC 3mm thick which gives a protective surface when cutting almost any material. They not only protect the surface of a bench, kitchen table or desk from damage but make knife blades last that little bit longer. Great for use with cutting scales, mount cutters or craft knives.
PAGE 16
Stained Glass Tools Weller HK2 Stained Glass Soldering Iron 80W Leponitt Running Pliers Based on the Weller SP80NUK is a high performance, 80W, heavyduty soldering iron the kit is ideal for stained glass work. It’s useful for repairs to existing pieces or creating new Tiffany lampshades, terrariums or attractive pendants. Three LED’s deliver light to the application for superior accuracy. The soldering iron delivers both comfort and flexibility.
PAGE 17
Jewellers Tools 502411 Pliers Flat Nose Jeweller’s Loupe 10x Doublet 502412 Pliers Chain Nose 502414 Pliers Flat & Half Round Doublet loupes have two lenses (hence the doublet tag) in order to help eliminate spherical and chromatic aberrations. The 10x means that the loupe will magnify an image 10 times, so something 1mm diameter will look as if it is 10mm diameter. This 10mm diameter loupe folds into a chrome plated steel housing for protection when not in use.
PAGE 18
Miniture Precision Tools 12 Piece Confined Space Ratchet Driver & Bit Set Model Craft Double Ended Carver A well finished forged 1/4” hex mini reversible ratchet. 95mm in length, with a 15mm deep head. With a screwdriver tip in place it still only needs 30mm in which to operate. Included are 1/4” hex 10 tips (3 Phillips and 7 Torx) plus a 1/4” hex quick release bit holder to use in a drill or extend the reach of the ratchet. Inc.vat £15.95 Ratchet Driver & Bit Set Ex.vat £13.
PAGE 19
Airbrushing SprayCraft Airbrush Stand An airbrush stand helps you keep the working area tidy and clean. It swivels, rotates and clamps securely to your workbench or desk. Holds two airbrushes. Inc.vat £15.44 Airbrush Stand Ex.vat £12.87 Code 504982 SprayCraft Universal Airbrush Propellant A universal airbrush propellant available in 300ml and 500ml cans which does away with the need for a compressor. Suitable for use with SprayCraft, Aztek, Badger, Revell and most other popular airbrushes.
PAGE 20
Airbrushing Lights and Magnifiers for Detail Working LightCraft LED Hand-Held Magnifier with Inbuilt stand SprayCraft Acrylic Airbrush Paint These acylic paints can be used with airbrushes, paint brushes, pens or rollers. They are available in a variety of colours and can be used on metals, plastics, glass, paper, canvas, wood, leather, fabrics, ceramics and clay. Inc.vat £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £24.