Specifications

13
Function Description...
CAUTION: Before adjusting nail depth,
remove the fuel cell, the battery and
the nail magazine before continuing.
Using a 4mm Hex key loosen the two Hex screws
as shown in fig 9 and move the contact element.
Re-tighten the Hex screws and replace the spring
(See figs 10-11)
Installing the fuel cell
Adjusting the nail depth
1) Push in fuel cell lock and open the cover.
2) Insert the fuel cell into the compartment.
Direct the jet nozzle valve (a) towards the
adapter (b). (See figs 6 and 7)
Fig 5
Fig 6
3) Insert the jet nozzle (a) into the small hole
in the adapter (b). Make sure it is inserted
properly.
4) Close the fuel cell cover.
Fig 7
Fig 8
a
a
b
!
Fig 9
Fig 10
Fig 11
Spring