Specifications

19
Maintenance...
1. Remove the two Phillips screws (a) on top of
the front cover (b), place safely aside.
2. Following the instructions illustrated on top of
the cover, remove the cover (b) and place aside.
(See figs 39-40)
Note: The cover my be tight to remove, a little
force may be needed.
Note: Beneath the cover there are two plastic
washers resting on the top exhaust plate (c),
remove them and place safely aside. (See fig 41)
beneath the exhaust plate, see fig 43, place these
spacers safely aside.
5. Remove exhaust plate valve (d), clean with
de-greaser and place safely aside. (See fig 44)
6. Blow out the exhaust vents with a air line and
clean the manifold. (See fig 45)
3. Using a 4mm hex key remove the four hex
screws and place them safely aside. (See fig 42)
4. Lift away the exhaust plate (c), Note be careful
when removing, there are two depth spacers
Fig 39
Fig 40
Fig 41
Fig 42
Fig 43
Fig 44
Fig 45
Continues Over....
a
b
c
d
Exhaust vents and manifold