User manual

Collet Chuck Assembly (Optional)...

Maintenance...

4) Insert the collet chuck into the spindle taper and screw it onto the

arbor shaft. Hold the collet chuck, using an adjustable or ‘C’ spanner

(See fig 13). Insert the 8mm hex key into the recess on top of the

arbor as shown in figs 8 & 10, while holding the chuck tighten the

arbor (DO NOT OVERTIGHTEN)

5) Replace the draw bar cover, release the spindle lock handle,

reconnect the mill to the mains and continue with the operation.

Fig 13

“C” or adjustable Spanner

Collet chuck

Oil

OIL

Oiling Points

Fig 14