User manual
OWNER’MANUAL OF SL700C/SLP600C
12
1. Keep the machine when adding fuel/oil in the even place.
2. Loosen the tank lid，eliminate the pressure difference between the
outside and inside.
3. Wipe up the tank lid，add the fuel/oil to eighty
percent.
4. After finishing adding fuel/oil，tighten the
tank lid ,make sure that there is no leakage.
■
The starting way of engine
1.
Uses the fingers pressing the primer button until you observe the
fuel returning to the tank.
IMPORTAT
When refueling, do not fill beyond eighty percent of
the tank capacity, if you add too much, the fuel will
leak from the tank, and possibly result in an
accident.
DAGER
● After adding fuel/oil, before starting the engine，
remove the machine three meters away to start.
●Don’t start the engine indoors or in poor ventilation to
avoid the poisonous of carbon monoxide.
IMPORTAT
Please remove the blade cover before starting