User manual
OWNER’MANUAL OF SL700C/SLP600C
13
When there is some fuel remaining in the tank，
when the engine is still hot, if you wish to start
it again ,it is no need to operate the primer button.
1. Put the choke lever on the carburetor
to the closed position.
2. Put the machine onto even ground, at
first pull the recoil handle slowly,
when you feel some resistance，pull
the recoil handle quickly .
3. After starting the engine，return the
choke lever to the opened position .
4. Start the engine for one to two
minutes for warming.
If the fuel is too
much ， which
wont allow the engine to start , please remove the spark plug to dry,
then start again.
■
■■
■ To stop the engine
1. Release the throttle，run on low speed to allow the engine to cool.
2. SL700C: put the stop lever in “stop” place.
SLP600C: put the stop lever in“○” place.
■
■■
■ The operation method of engine
CAUTIO
● Before operating the throttle and handle, please
remove the lock.
● After starting the engine, return to the throttle handle,
make sure the blade is operating，if not stop the
engine and make sure carburetor and throttle whether
is in good condition .
● Before starting the machine, make sure that the fuel
tank cap is not loose and that there is no fuel leakage.
● Place the machine onto even ground, there
could be an
accident when the blade is too near the ground, also
don’t start with a single hand.
SUPPLEMET
S
UPPLEMET