User manual
OWNER’MANUAL OF SL700C/SLP600C
7
● While starting the engine make sure of the safety of your
surroundings.
● The machine has a centrifugal clutch; the blades will not move
when idle. Only when the engine speed is up to a certain level will
the blades begin to move.
Please don’t put the throttle into the highest speed
when starting.
■
■■
■ otes of the operation
● Keep your hands tight on the handles, and keep
the correct operating position.
● When the blade is be cleaned, stop quickly, restart
it after cleaning.
● Do not touch the spark plug or wire in an attempt
to stop the engine.
Whilst operating or stopping the
machine, never touch the muffler,
plug and other metal parts (these parts will up to a
high temperature)，to prevent injury .
■
■■
■ Warning for maintenance
● Please don’t make any changes to the machine, otherwise it will
cause damage to the machine.
● While removing the blades, Please wear gloves and other proper
equipment.
● Please maintain the equipment regularly, refer to the manual.
● While lubricating the blades , adding fuel or grease , please use
high quality products.
●
It is very dangerous to change the machine yourself, never
do that .
●
Please note that you will not entitled to any protection if
you change it and use it for another purpose for which it is
WARIG
CAUTIO
WARIG