Instruction manual

Maintenance
17
Daily
• Empty the collection bag before it overows, wear a
dust mask whilst removing and emptying the bag.
Weekly
• Check the inlet and outlet ducts and remove any
accumulated sawdust.
•Check the inlet hoses for splits and cracks, repair as
necessary.
• Check the dust collection bag for wear and tear,
especially around the neck at the Jubilee clip. If wear
WARNING! BEFORE CARRYING OUT ANY
MAINTENANCE DISCONNECT THE CYCLONE
EXTRACTOR FROM THE MAINS SUPPLY
WARNING! KEEP CHILDREN AWAY FROM WORK
AREA
After a period of time dust, sawdust and shavings can
build-up causing blockages and reduced suction
performance. Follow the maintenance instructions below
to keep your extractor working at peak performance.
Basic Maintenance
WARNING! ALWAYS WEAR A DUST MASK
WARNING! ALWAYS WEAR EYE PROTECTION
Fig 43
or fraying is occurring, replace the bag.
• Check the motor for dust, sawdust, shavings etc,
build up. If this has occurred, clean with a vacuum
cleaner.
• Move the shaker paddle handle (15) back and forth
to remove any built up dust and debris from inside the
filter.
Monthly
• Remove the dust bag securing clip (19) and remove
dust bag (20), using a vacuum cleaner, clean inside the
filter.