Instruction manual

Step 20
Put the big PE Bag (S) inside the dust drum.
And try to get air between the Drum and PE
bag out as much as possible
Step 21
Assemble reducer cone to drum lid
Assemble Lid (Z) and top cone (A) as
shown. And Fix by 1/4” Flange HD
Screw, and 1/4”Flange Nut
Place this assembly on top of the
mobile collection drum to assist in
the next step
Step 22 Reducing Collector Assembly
When d rum and lid assembled under the
machine. Lift the Reducing Collector, and
assemble under Machine to connect together.
Using small Round Clamp (I) fix by 1/4” *2-1/2” L
Hex Screw and 1/4” Nut. Fit clamp and tighten it
progressively while lightly tapping on the clamp
with a soft face hammer around the outside
11