Instruction manual

Machine Assembly

12 of Cap

Screws

Step 1 Assemble Round Collector Main Housing

Place the main housing (F) upside down, and place the

Round Collector (B) on the housing on motor side with inlet

Chute positioned as shown

Fixing by 12 off, 3/16” x 3/8” Cap screws around drum and

6 off, 1/4 Hex head Bolts on leg supports

Notice:

The Position of

Inlet

6 off Hex Head Bolts

Step 2 Assemble Upper Leg with Round Collector

Fit three pcs Upper Legs (O) in the tube bracket on

the round collector as shown. Fixing by Three 5/16” Button

HD Screw for each leg