Axminster Industrial Series machines are designed for top performance in busy workshops. Class leading features and high build quality combine to provide machines that are easy and safe to use. Contact our Industrial & Specialist Team for further advice to make the right choice for your business. Axminster Tools & Machinery - call free 0800 371 822 mobile friendly 03332 406406 visit axminster.co.
Axminster Industrial Series There’s a lot more to Axminster than the catalogue.
Dust Extraction Systems Design and Installation Axminster Tool Centre specialise in the design and installation of bespoke LEV Extraction Systems for industry, education and general workshops. Our in-house Design Team will carry out a site visit and survey to discuss your requirements and provide a design specification (with CAD drawing), which will effectively control particle emissions and protect the health of your employees.
Industrial Bandsaws AP3501B3 The AP3501B3 is a small high quality machine. The combination of rigidly built steel body, finely ground cast iron table, deep section rip fence and fully adjustable ball bearing blade guides produce the level of performance demanded by both the trade and advanced skills amateur user. The rip fence runs on a calibrated aluminium extrusion and is locked firmly in place with a camlock lever, giving a firm and accurate location.
AP5300HD3 and AP6300HD3 Three phase heavy duty Axminster Industrial Series bandsaws are designed for continuous use in manufacturing or production facilities. Powered by electro-magnetically braked motors that offer ample power at full depth of cut in all timbers. The heavily fabricated chassis is in welded steel with perfectly balanced solid cast iron wheels to give exceptionally smooth running.
Industrial Panel Saws 06 • Powerful, heavyweight but compact dimensions • Extra large rigid cast iron table • 2,200 x 360mm fully featured sliding table • Crosscut frame fully supported by a heavy duty telescopic arm • Rear outfeed and right hand support tables • Rigid, cast iron rip fence bracket • Uses 305mm saw blades, wide range available • 120mm scoring blade, fully adjustable for depth and position Easy access for blade changing Buy with confidence from Axminster with the FREE 3 Year Guarantee – av
Not every trade workshop needs a large panel saw dominating the workspace, but a compact, fully featured saw is a tempting alternative. P30/2200 The Axminster Industrial Series P30/2200 does just that, having a robustly constructed chassis in heavy gauge steel and generous grey cast iron table. This is a sturdy chassis that gives stability and vibration free running. The 305mm main blade gives a maximum depth of cut of 90mm.
Industrial Panel Saws 08 Panel Saw • Precision ground cast iron main table • 2,500 x 360mm or 3,200 x 360mm sliding tables with large panel support table • Takes 305-355 main saw blades • Separately powered 120mm scoring blade • Outfeed and side extension tables standard • Cast iron rip fence with fine adjustment Cast iron rip fence shoe Small work mitre fence and clamp Buy with confidence from Axminster with the FREE 3 Year Guarantee – available on all Industrial Series machines P305/2500 230V 1ph P30
A great range of mid sized panel saws designed for ease of use and accurate cutting of board materials of all types. With a choice of 2,500mm or 3,200mm x 360mm sliding tables which are robust and smooth running, giving a 2,400mm or 3,100mm capacity before the blade. P305/2500 and P305/3200 A crosscut frame supports the larger boards and a mitre fence with a telescopic extension and two flip-over length stops is fitted.
Industrial Panel Saws • Powered blade height and tilt with digital read-out for accurate tilt setting • Extremely robust cast iron rip fence with fine adjustment and cam locking (D405A/3 – motorised and programmable for guaranteed accuracy every time) • Large, cast iron precision ground main table plus side and rear extensions • Smooth running 3,200 x 395mm sliding table with motor control switches • Takes 355-400mm main saw blades, separately powered 120mm scoring blade • Large panel support frame including
A panel saw is the machine at the heart of any professional workshop and these saws would win a place in all but the largest. D405A/2 and D405A/3 D405A and D405A3 specification These are our top specification Axminster Industrial Series panel saw’s, both featuring a 3,200mm long sliding table of 395mm width with a four track bearing system for extra stability and smooth running.
Industrial Rip Saws TSCE-12R 12 Compact but very robust construction An industrial quality circular saw, primarily designed for rip work, compact in size but of very robust construction. Based around an all welded steel base with a heavy, finely ground, all cast iron table and amply powered by a mechanically braked induction motor.
TSCE-400R-1 This saw is a larger version of our TSCE-12R table saw, having the same basic design but remaining quite compact in size and extremely robust. Available as a basic rip saw model, this machine is constructed around a heavy gauge welded steel chassis with a heavily braced cast iron table of very generous proportions. The 5.6kW 415V 3ph motor drives the 400mm blade giving ample power even at the maximum 130mm depth of cut.
Industrial Morticer • Single handwheel design for both longitudinal and lateral table movement • Two position material clamp for fast clamping of a variety of material sizes • Multi-position hand lever positions to provide the correct leverage for comfortable use • Gas strut to provide smooth downward travel of the chisel head • Large storage space in stand cupboard • Large table surface with tall back fence • Easily set depth stop for repeat accuracy • Feet brackets provided to allow machine to be bolted t
Industrial Oscillating Belt Sander An oscillating belt sander with many nicely thought out features. Well suited to any small to medium sized joinery workshop or cabinet makers, it is guarded and easy to use. Can be used horizontally or vertically, the belt oscillates across the platen 50 times per minute providing a scratch free finish. In the vertical mode the work table can be raised by means of a hand wheel and adjusted to give a close gap to the sanding belt.
Industrial Dual Drum Sanders ST-635 The ST-635 Dual Drum Sander has an impressive capacity of 635mm width by 150mm depth which can accommodate a wide range of items such as panels, boards and kitchen doors. It has a rubberised conveyor belt for feeding panels through without damaging the underside of the panel. The conveyor is provided with an electronic variable speed control with load sensing which prevents overheating the abrasive.
R3408 This twin drum sander is a heavyweight of the range. The construction of the machine is predominantly heavy gauge steel sheet, the 150mm diameter rollers are precision machined from aluminium castings and the power is supplied by two motors, 5kW(415V, 3ph) for the sanding drum drive and a 190W one for the conveyor belt drive.
Industrial Tenoners SETM-2HD and SETM-3HD Machines in the best tradition – the SETM-2HD 2 Head Tenoner and the SETM-3HD 3 Head Tenoner are designed and built to withstand continuous production use. Cast iron base, column and slide ways provide a rigid and durable mainframe assembly, and the high efficiency motors supply ample power. The large, ground cast iron sliding table slides easily on ball race supported wheels, and cutter head slide movements are adjusted on dovetail slides.
Machines in the best tradition – the SETM-2HD 2 Head Tenoner and the SETM-3HD 3 Head Tenoner are designed and built to withstand continuous production use. SETM-2HD and SETM-3HD specification SETM-2HD – 2 x 2.2kW (230V 1ph) - 2 x 2.2kW (415V 3ph) SETM-3HD – 3 x 2.2kW (230V 1ph) - 3 x 2.2kW (415V 3ph) SETM-2HD – 2,175 x 60mm Main cutter heads SETM-3HD – 2, 175 x 60mm.
Industrial Spindle Moulders SS-512ML Spindle Moulder SS-510M 230V 1ph SS-510M 415V 3ph SS-512ML 415V 3ph SS-512TSL 415V 3ph SS-510M Code 501002 501003 501004 501005 A rugged medium sized professional spindle moulder with a deep section, precision ground high grade cast iron table. With a choice of five spindle speeds and a capacity of 335mm tooling diameter above the table many deep profiles and rebates can be machined. Ample power is available from its 4.
Co-Matic Power Feeds SS-512TSL A rugged medium sized professional spindle moulder with a deep section, precision ground high grade cast iron table. An integrated sliding table runs on six adjustable ball bearings giving exceptionally smooth travel. The 30mm diameter spindle can tilt forward 10° and backwards 45° which has many advantages including: AF308 • 3 rollers of 100 x 50 mm • 4 speeds from 2.9 to 11.5 m/min (1ph) • 8 speeds from 2.
Industrial Extractors UB-2200VECK and UB-3300VECK Cyclone Extractors These mobile cyclone dust extractors are suitable for small to medium sized trade workshops. Able to handle most types of wood waste except for the very finest of dusts. With a 200mm inlet these are very suitable for a ducted workshop system, or if required, you could connect to two machines (UB-2200VECK) using the included 2 x 100mm adaptor or three machines (UB-3300VECK) using the included 3 x 100mm adaptor.
These dust extractors would be a great choice for school Design and Technology rooms, CNC routers, drum or pad sanders and other specialist machines. Mobility castors UB-503 and UB-505 Dust Extractors These are a different style of dust extractor suited to specialist situations. In a cabinet style, they are quiet in operation, very mobile and completely self contained. Able to handle sanding dusts due to the multi piece filter system which has a manual shaker lever.
Industrial Edgebander MAX 330 The MAX 330 Edgebander with glue pot can apply edges to straight panels with an automatic feed. It can also apply glue directly to panels with both wood and plastic edges, in coils up to 3mm thick and strips up to 4mm thick. It is equipped with automatic front/rear trimming cut-off, and flush trimming and buffing on both sides of the workpiece. The Teflon-coated glue pot has a capacity of 1.1kg and includes five heating elements.
Designed for top performance in busy workshops. Class leading features and high build quality. A superb range of circular saw and bandsaw blades, router cutters and spindle moulder tooling for virtually every machine. Co-Matic produce innovative, high quality and reliable power feeds for any woodworking job where automatic feeding is desired. Buy with confidence from Axminster with the FREE 3 Year Guarantee – available on all Industrial Series machines Call 03332 406406 or visit axminster.co.
