Code: 501217 UB-803 Extractor Axminster Tool Centre, Unit 10 Weycroft Avenue, Axminster, Devon EX13 5PH www.axminster.co.
CONTENTS IMPORTANT SAFETY RULES-------------------------------------------------------------- 2 IMPORTANT SAFETY RULES FOR DUST COLLECTORS--------------------------- 3 GROUNDING INSTRUCTIONS------------------------------------------------------------- 4 SPECIFICATIONS------------------------------------------------------------------------------ 5 UNPACKING CONTENTS-------------------------------------------------------------------- 6 HARDWARE PACKAGE------------------------------------------------
Wood working can be dangerous if safe and proper operating procedures are not followed. As with all machinery, there are certain hazards involved with the operation of the product. Using the machine with respect and caution will considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or ignored, personal injury to the operator may result.
WARNING: Basic precautions should always be 10. DO NOT pull the dust collector by the power cord. followed when using your dust collector. To reduce the risk NEVER allow the power cord to come in contact with of injury, electrical shock or fire, comply with the safety sharp edges, hot surfaces, oil or grease. rules listed below: 1. 3. 4. 12. 13. a damaged cord or plug. If the dust collector is not unclogging and cleaning.
The appliance must be grounded, if it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having equipment-ground conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Specifications: Motor----------------------------------------------------------------------------------------- 3HP/240V/50Hz/ 1 Phase AMP------------------------------------------------------------------------------------------------------------------ 16.
UNPACKING & CHECKING CONTENTS: A：Impeller Housing H : Belt Clamp B： Collector Housing I: C： Left Stand J : 5 Micron Filter Bag D：Right Stand K : Hanger E： Base L : Wheel F： Inlet Adaptor M : Stiffening Plate G：Handle 6 PE Bag
Hardware package: NO. Description Specification Q’TY Part List No. A Button Head screw 1/4”*1/2” 14 NO.36 B Flange Bolt 5/16”*1/2” 16 NO.35 C Flange Bolt 1/4”*1/2” 4 NO.17 D 3/16”*3/8” 1 NO.8 1/4”*5/8” 2 NO.34 E Phillips Head Screw Countersunk Phillips Head Screw Open Wrench 10*12 1 NO.29 F Allen Wrench M5 1 NO.
ASSEMBLY INSTRUCTION STEP1. Secure Wheel (No.15) on Base (No.14) as Fig.1 (FIG.1) STEP2-1. Secure the bottom part of Right Stand and Left Stand on Base (No.14) with Flange Bolt 5/16”*1/2” (No.35). STEP2-2 Secure the Stiffening Plate on both side of Right and Left Stand with Flange Bolt 1/4”*1/2” (NO.17). (FIG.2) STEP3. Secure and tighten Impeller Housing(No.37) and Collector Housing(No.9) with Phillips Head Screw 1/4”*1/2” (No.36) as Fig. 3 (FIG.
STEP4. Assemble the upper part of Right and Left Stand on Impeller Housing with Flange Bolt 5/16”*1/2” (No.35) (FIG.4) STEP4-1. Assemble PE Bag (No.11) under Impeller Housing and tighten it with Belt Clamp (No.10) as Fig. 4A STEP4-2. Assemble the Hanger (No.13) on Collector Housing as Fig.4A STEP4-3. Secure Inlet Adaptor (No.7) under Impeller Housing with Phillips Head Screw 3/16”*3/8” (No.8) (Fig.
STEP5-1. Assemble the 5micron Filter Bag (No.12) on upper of Collector Housing and tighten with Belt Clamp(No.10) STEP5-2. Secure the Handle (No.16) on front of Collector Housing With Countersunk Phillips Head Screw 1/4”*1/2” (No.34) (FIG.
EXPLODED DIAGRAM---- 11
Part List NO.
36 37 38 39 40 41 Button Head Screw Impeller Housing Lock Nut Screw Nut Phillips Head Screw 1/4”*1/2” 5/16” 5/16”*70 5/16” 3/16”*3/4” 13 14 1 2 1 1 2
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local recycling centre and place into the appropriate recycling bin. Only for EU countries Do not dispose of electric tools together with household waste material.
