Specifications

14
Assembly
Fig 25
Fig 26
Fig 27
Fig 28
D1
D2
D1
Circular rings
Fig 29
Fig 30
Locate the guide assembly mounting bracket (D3), using a 6mm allen key remove the four caphead bolts &
washers on top of the spindle guard (D1), place safely aside (See fig 29). Lower the guide assembly mounting
bracket (D3) on top of the spindle guard & line up the four pre-drilled holes, replace the caphead bolts & washers
you removed earlier and tighten (See fig 30) (DO NOT OVERTIGHTEN).
Caphead bolts & washers
6mm Allen key
D3