Specifications

20
Illustration & Parts Description
Spindle moulder control panel
NVR ON/OFF switch
Fig 41
Fig 42
Reversing selector switch
Emergency stop shroud, slap the shroud
down to stop the machine.
Fig 43
Fig 44
Off
On
NOTE: Turning the reversing selector switch to the (L) position the motor will run in a forward motion & the
spindle will turn counter-clockwise. Turning the selector switch to the (R) position the motor will run
reverse & the spindle will turn clockwise (See fig 43).
NOTE: The machine is equipped with a FORWARD/REVERSE switch as shown in figure 43. You will find
many instances that it is necessary to flip the cutter over and reverse the cutter rotation.
Sliding table locking knob,
locked in the out position
Pull the locking knob & twist
Fig 45
Fig 46
CAUTION: BEFORE TURNING THE SELECTOR SWITCH, MAKE SURE THE
MACHINE IS AT A COMPLETE STOP!