Operation Manual

Axnes AS
Document number
Revision
Date
AX-PNG-UMAN-2017
Issue C
2020-Jul-09
Page 2-3
2.3 General UI and outline
The BST 30/35 supports the following interfaces:
• Circular connector for:
o 28VDC external power
o Intercom connection
o PTT out to intercom
o RS232/NMEA position data
o Headset connection
• BNC antenna port
• USB Type-C for charging and configuration
The PNG BST30/35 has a limited two letter display and 4 navigation buttons allowing limited
configuration and status control.
NOTE: The antenna port shall always be terminated when the base station is powered.
Failure to terminate the antenna port may destroy the output amplifier.
Two letter alfa numeric display
BNC antenna port
Bluetooth antenna
(future option)
USB Type-C charging
and configuration port
4x Push button for power on/off
and menu navigation
Connector for intercom
and headset integration