Operation Manual

Axnes AS
Document number
Revision
Date
AX-PNG-UMAN-2017
Issue C
2020-Jul-09
Page 2-5
The display can show two letters at a time and implements scrolling of text to display longer
strings. Most menu entries are therefore presented with a two-letter acronym, before the full
menu name is scrolled.
2.7 Power on/off
The BST30/35 is turned on by pressing the volume up/ON button. The BST30/35 will start up
in the last used configuration/mode. At power up, the configured name of the unit is
displayed. If no specific name is configured, the BST30/35 displays the last four digits of the
serial number.
The BST30/35 is turned off by holding the volume down/OFF button for 3 seconds, until a
double dash is displayed to indicate shutdown.
2.8 Display indications
Power on and active mode: When the BST30/35 is powered on and in radio on mode
(default power up state configurable) the unit will display a standby mode. The standby mode
is indicated by one blinking dot in the display, indicating that the base station transmits, and
SR search and rescue
Initial Scroll buffer