Manualshelf

Operation Manual

ManualsBrandsAxnes ManualsComputers & AccessoriesWireless intercom extension base station for use in high noise environments operating in the UHF band
21222324252627282930
Axnes AS
Document number
Revision
Date
AX-PNG-UMAN-2017
Issue C
2020-Jul-09
Page 2-17
Test audio: The BST30/35 has several pre-recorded audio tracks that can be played back
and sent to the handsets. This can be used to test and configure the system.
Out level: Sets the level of the audio from the BST30/35 to a connected intercom. A low
impedance system will normally require lower level than a high impedance system. Adjusting
this parameter is essential to avoid echo in the system. Refer to [1] chapter 12 Interfacing to
intercom.
VOX Level: The equipment is by default set to minimum VOX level when VOX mode is
entered. The VOX trigger level will increase as the environmental audio conditions force the
level up. The setting is persistent over a power off-on cycle.
NA
Noise attenuation
6-12-18-24-32 dB
EC
Echo canceller
On..Off
L1
Line 1 menu
Refer to line 0 menu
HM
Headset menu
TA
Test Audio
T0
Test Audio off
T1
Audio track 1
T1
Audio track 2
T1
Audio track 3
T0
Test Audio 4