Operation Manual

Axnes AS
Document number
Revision
Date
AX-PNG-UMAN-2017
Issue C
2020-Jul-09
Page 1-8
Charging time is expected to be around 3 hours, but depending on the surrounding
temperature, charge time may increase or be disabled. Charging is disabled below 0°C and
above 50°C. If temperature is below 10°C or above 40°C, the charge current is reduced, and
additional charging time must be expected.
1.5 Headset
The BST30/35 allows for connection of a headset to the base station. This allow for
replication of the lost intercom port or standalone operation. The headset interface is
compatible with high and low impedance headsets, and the volume setting is controlled on
the base station.
Connecting a headset will require an adapter cable (available from Axnes).
1.6 Identification of article
PNG Base Stations in the BST30 series with part numbers in the AXS-BS-D030XX* series
PNG Base Stations in the BST35 series with part numbers in the AXS-BS-D035XX* series
*Note: XX indicates any number of characters at the end of the part number string.
1.7 Document References
Ref #
Doc. Title
Doc number
[1]
PNG Installation and Interface Control Document
AX-PNG-ICD-2014