User manual

99
4.10 Choosing the Analyses To Do
After setting the sweep stimulations, you have to decide which calculations you want to do. To do this call
up the Amplitude/Slope Analyses To Do Dialog Box (Fig. 4.10.1A).
On the right the dialog box shows which calculations can be done: DC Baseline before of each Stimulus
Pulse, the Peak Amplitude, Latency, Area, Duration, Rise Time, Decay Time, Coastline, PopSpike
Amplitude, PopSpike Latency, Slope and/or Average Amplitude of synaptic potentials produced by S0 and
S1 stimulation, and if the Rm pulse is On, patch pipette series resistance (Rs) and membrane or cell input
resistance (Rm).
A
B
C
Fig. 4.10.1. A) Amplitude/Slope Analyses To Do dialog box. In this example only analyses on channel
AD0 were chosen , and B) four were placed on the MainPg, and C) eight on the AnalysisPg.