Installation Guide

10
Installation – 16549181
Wrap the threads on the two plugs with Teflon tape.
Install one plug on each rough.
Use the mounting plate as a template to mark the
positions of the screw holes in the subfloor. Use an 8 mm
bit to drill the holes.
Install the anchors (included).
Install the screws with the noise reducers and washers.
Make sure that the roughs are level.
Wrap the threads on the supplies with Teflon tape.
Install the supplies in the roughs. For proper operation of
the tub filler, the hot supply should be on the left, the cold
supply on the right.