Installation Instructions / Warranty 27495XX1 27495XX3 27486XX1 27486XX3 27447XX1 27457XX1 27491XX1 27425XX1 Raindance S AIR Raindance E AIR 27426XX1
Showerheads with model numbers ending in “1” are available in the US and Canada only. Raindance S 150 AIR 3-jet 27495XX1 Raindance S 150 AIR 1-jet 27486XX1 Rain AIR Rain AIR Balance AIR Whirl AIR Maximum Flow Rate 2.5 gpm Raindance E 120 AIR 3-Jet 27447XX1 Maximum Flow Rate Maximum Flow Rate 2.5 gpm Raindance S 120 AIR 3-Jet 27457XX1 Rain AIR Rain AIR Balance AIR Balance AIR Whirl AIR Whirl AIR 2.5 gpm Raindance S 100 AIR 3-jet 27491XX1 Maximum Flow Rate 2.
Raindance S 100 AIR 1-Jet 27426XX1 Rain AIR Maximum Flow Rate 2.5 gpm Showerheads with model numbers ending in “3” are available in Australia only.
Installation Make sure that the filter gasket (already installed) is screwed firmly into the ball joint. self-sealing filter gasket ball joint Install the showerhead on the shower arm. If the flow of water decreases over time, remove and clean the filter gasket.
Scale Removal The Raindance AIR showerhead incorporates the QUICKclean™ cleaning system. If scale deposits are noticed in the spray channels, turn the water on lightly and rub the spray channels with a finger or a sponge. If scale deposits are noticed on the spray face, pour about 3/4” of a commercial scale remover, such as Lime-Away™ or CLR™, into a shallow dish. Dilute the remover according to the label instructions. Soak only the spray face in the solution for the amount of time specified on the label.
Install the showerhead. Flush the showerhead for at least one minute. User Instructions - Raindance AIR 3-jet models only To change spray modes, push the selector lever until the desired spray is achieved.
Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty. Cleaning Materials for Faucets and Showers • To remove lime scale, use only products made specifically for that purpose.
D. Accessories, connected materials and products, or related products not manufactured by Hansgrohe. TO OBTAIN WARRANTY PARTS OR INFORMATION Contact your Hansgrohe retailer, or contact Technical Service at: Hansgrohe Inc. 1492 Bluegrass Lakes Parkway Alpharetta GA 30004 Toll-free (800) 334-0455. In requesting warranty service, you will need to provide 1. The sales receipt or other evidence of the date and place of purchase. 2. A description of the problem. 3.