Spec Sheet

ILLUMINATION DISTANCE
SPECIFICATIONS
®
Distance In Feet
Axton, 801 W. Robinson Dr., Suite #500,
North Salt Lake, UT 84054
[phone]
[phone]
[e-mail]
www.axtontech.com
®
SMART Series IR
AT-3S NANO
MADE IN THE USA
All illuminators designed and built in
Salt Lake City, UT, USA .
EASY INTEGRATION
Seamless & precise integration via I/O ports.
Link multiple units together. Synch with camera or any
other system device with input or output capability.
ULTRA COMPACT DESIGN
Measures only 1.5” (38mm) x 1.5” (38mm) x 1.5” (38mm)
LOW VOLTAGE
(9-18) VDC Low-voltage input for simplified installation.
LIFETIME WARRANTY
All products are covered by a lifetime warranty
with advanced replacement.
Wavelength 850nm (semi-covert)
Input Voltage (9 - 18)V DC
Power Consumption 3.5 W
Operating Temperature -2°F...+157°F / -20°C...+52°C
Dimensions 1.5” x 1.5” x 1.5” / 38 x 38 x 38 mm
Weight 2oz./0.06kg.
Environmental IP 55 - Indoor use only
Mounting 1/4 - 20 socket
AUTOMATIC ON/OFF
Automatic On/Off, Night/Day switch via built-in photocell.
TIPS:
HFOV - Horizontal Field Of View - Coverage area in feet/
meters or an angle. For optimal system performance HFOV
should be matched to cameras eld of view. The greater the
coverage angle the less illumination distance.
Use IR-Corrected Lens - Non IR-Corrected lenses may produce
blurry images due to focus shift caused by IR light, this
requires refocusing.
Consider using I/O ports to synch IR & Camera - Input/
Output ports allow to hard-wire IR & the camera for seamless
switching from day to night modes. You may also daisy chain
multiple IRs to switch ON/OFF synchronously.