Operation Manual
20
20
Thank you for purchasing this AXTON quality audio component.
The AXTON amplifier series has been developed for the use with mobile
sound systems using 12 Volts negative chassis ground power supply.
The amplifiers may be used in combination with almost any brand and
type of head unit and speakers in cars, vans, boats etc. and when installed
correctly, AXTON amps will produce exceptional results.
In order to familiarize yourself with all the special features and controlling
options of your brandnew power amplifier, we advise you to read these
instructions carefully before attempting the actual installation.
Should you have any difficulty in installing this amplifier in your vehicle,
please contact your nearest AXTON dealer.
∑ PWM MOSFET high efficiency switching power supply
∑ A/B amplification technology with BJT transistors
(Bipolar Junction Transistors)
∑ Discrete solid state layout
∑ Operating mode switchable between fullrange and highpass or
lowpass amplification respectively
∑ Integrated active high- and lowpass filters with
12 dB/oct. cutting slope for satellite or subwoofer operation
continuously adjustable from 40-240 Hz
∑ Soft start & turn-off delay circuit
∑ Automatic on/off via remote switching from head unit
∑ Protection circuitry against D.C. offset and short-circuits at
speaker outputs as well as amplifier overload or overheat
∑ Input level/gain adjustable from 0.2 to 9 V