Operation Manual

34
34
   
Rated power output stereo (at 13.8V) at 4 ohms (W RMS) min. 1 x 250 2 x 105 4 x 75
Rated power output stereo (at 13.8V) at 2 ohms (W RMS) min. 1 x 360 2 x 150 4 x 90
Rated power output bridged (at 13.8V) at 4 ohms (W RMS) min. n. a. 1 x 330 2 x 180
Frequency response (Hz) 10 - 30'000 10 - 30'000 10 - 30'000
Total Harmonic Distortion (THD) at 4 ohms (%) < 0.05 < 0.05 < 0.05
Signal to noise ratio (dB/A) > 100 > 95 > 100
Channel separation (dB) n. a. > 55 > 50
Crossover slope (dB/oct.) 12/12 12/12 12/12
Crossover range low/highpass state-variable (Hz) HPF
od. LPF 40-240 40-240 40-240
Crossover range subsonic (Hz) 20-50 n.a. n.a.
Recommended power cable cross-section with approx. 5 m (mm²) 20 20 20
Input impedance (kohms) 47 47 47
Input sensitivity (V) 0.2 - 5 0.2 - 5 0.2 - 5
Damping factor @4 ohms > 150 > 100 > 160
Thermal cut-off (°C) 80 80 80
Fuse (A) 2 x 30 2 x 25 2 x 30
Recommended main fuse on battery side with 20mm² power cable (A) 60 60 60
Dimensions (W x H x L in mm) 362 x 63 x 225 362 x 63 x 225 362 x 63 x 225
34


Specifications subject to change without notice.
AXTON is a registred trademark of ACR AG, Bohrturmweg 1, CH-5330 Bad Zurzach, Switzerland.