User's Manual

U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
11.1.2.2 SU system.conf
channel 0
antenna horizontal
mode static
mid 3
bid 0
interface atm0
backoff 0
provider abw
key Axxcelera
mask 1ffff
leds active
11.1.2.3 SU initswitchcli
tp default UBR 70000
sp default 256 stats
add atm25m 0 769 atm25i 0 200 default default perm epd
add atm25i 0 200 atm25m 0 769 default default perm epd
add atm25i 0 300 atm25m 0 770 default default perm epd
add atm25m 0 770 atm25i 0 300 default default perm epd
11.1.3 Troubleshooting
11.1.3.1 Can’t ping the radio from the terrestrial interface
AP
1. Check all physical connections. It is a straight cable from the CS to the Switch,
and a rollover twist from the wallbox to the switch (1-7,2-8).
2. Check to see if your atmarp entries are in the ARP table on the CS. ( ./atmarp if
you are already in the /usr/local/sbin directory)
• Add an atmarp entry
root@cs1 11:11:14 (4) [~] # atmarp -s 192.168.2.50 0.0.250
March 10, 2003 Company Confidential Page 113 of 149