User's Manual
Table Of Contents
- Revision History
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Document Overview
- AB-Access Overview
- AB-Access Reference Model
- Static Configurations
- CLIP_T
- CLIP_S
- Hybrid CLIP_S
- 1483_T
- 1483_S
- Native ATM
- Extender
- RF Design and Planning
- SNMP
- Rupee
- RTFD (Return To Factory Default)
U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
12 Extender
The Extender (PTP) units operate in the same manner as the AB-Access (PMP) units.
The Ethernet Extender configuration and operation are almost identical to the 1483_T
configuration except they use a single port bridge which is more efficient.
The ATM Extender configuration and operation is identical to the Native_ATM
configuration, where as the AP and the SU act as an ATM switch. Both AP and SU will pass any
ATM cells without looking at upper level protocols.
BHM = Backhaul Master
BHS = Backhaul Slave
12.1 Ethernet Extender
All assumptions for troubleshooting the Ethernet Extender are based on the following diagram.
March 10, 2003 Company Confidential Page 117 of 149