User's Manual
Table Of Contents
- Revision History
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Document Overview
- AB-Access Overview
- AB-Access Reference Model
- Static Configurations
- CLIP_T
- CLIP_S
- Hybrid CLIP_S
- 1483_T
- 1483_S
- Native ATM
- Extender
- RF Design and Planning
- SNMP
- Rupee
- RTFD (Return To Factory Default)
U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
rupee-dos –p atmos –d 2 –r <IP Address> <file> <file>
15.3 Rupee Option Definitions
-p <passwd> Specifies the password to use to allow write access to the AP/SU.
-d 2 Display debug level 2. Allows you to see what is being sent to the
unit.
-r Reboot unit when done programming. Make sure all of your
configuration files are correct if you use this option. When the unit
reboots, changes are final.
March 10, 2003 Company Confidential Page 147 of 149