User's Manual
Table Of Contents
- Revision History
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Document Overview
- AB-Access Overview
- AB-Access Reference Model
- Static Configurations
- CLIP_T
- CLIP_S
- Hybrid CLIP_S
- 1483_T
- 1483_S
- Native ATM
- Extender
- RF Design and Planning
- SNMP
- Rupee
- RTFD (Return To Factory Default)
U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
5.2 system.conf
5.2.1 channel
channel number
number
{0-14} This defines the RF channel.
0-4 = lower power (indoor only)
5-9 = mid power (outdoor)
10-16 = high power (outdoor)
Note: The channel plans can vary in different countries.
Example
The following example shows a unit transmitting on channel 14, which is a high power
channel.
channel 14
5.2.2 antenna
antenna polarization
polarization
{vertical | horizontal} Defines the antenna.
Example
The following example shows the antenna set to vertical polarization.
antenna vertical
5.2.3 mode
mode operation
operation
{static | interactive} Defines the mode of operation.
static = puts radio in stand alone mode
Interactive = puts radio in mode that needs EMS to operate
Example
March 10, 2003 Company Confidential Page 21 of 149