User's Manual

U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
The following example shows a unit operating in a static mode, which means the unit is
in a stand alone mode.
mode static
5.2.4 mid
mid number
number
{0-254} Mobile ID is a unique identifier per radio in a sector.
MID 0 is always used for the AP, and can’t be used for an
SU. MID 255 is reserved and used as the broadcast MID. Also no
MIDs can be duplicated in a sector.
Example
The following example shows a AP’s mid.
mid 0
5.2.5 bid
bid number
number
{0} The bid is currently not used.
Example
The following example shows bid of 0. The bid is not used at this time and should just be
left to the default of 0.
bid 0
5.2.6 interface
interface type
type
{atm0 | eth0} Defines the interface type for the terrestrial
interface.
Example
The following example shows a unit that has an Ethernet interface defined. It is
important to know that this is the only setting that makes a unit ATM or Ethernet on the physical
layer.
interface eth0
March 10, 2003 Company Confidential Page 22 of 149