User's Manual

U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
iport
{atm25i | atm25m} In port of uni-directional PVC.
atm25i = terrestrial
atm25m = wireless
ivpi
{0-7} Currently only VPI 0 is supported on the wireless
interface. The terrestrial interface can use any in the range.
ivci
{32-65535} In port VCI.
oport
{atm25i | atm25m} Out port of the uni-directional PVC.
ovpi
{0-7} Currently only VPI 0 is supported on the wireless
interface. The terrestrial interface can use any in the range.
ovci
{32-65535} Out port VCI.
tp
{name} This is the name of the traffic parameter (previously
set) that applies to this PVC mapping.
sp
{name} This is the name of the switch parameter (previously
set) that applies to this PVC mapping.
type
{perm | soft | none} For all static configurations “perm”
should be used.
epd
{epd] Early Packet Discard will discard arriving cells when
buffering is below 32 cells.
Example
The following example shows a uni-directional PVC mapped from the terrestrial to
wireless port.
add atm25i 0 100 atm25m 0 256 default default perm epd
5.4 initmr1483
Use this file only on APs. The corresponding file for an SU is initr1483.
5.4.1 floodmode
floodmode mode
mode {0 | 1}
0 = Flooding of unlearned unicast packets is disabled.
March 10, 2003 Company Confidential Page 27 of 149