User's Manual
Table Of Contents
- Revision History
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Document Overview
- AB-Access Overview
- AB-Access Reference Model
- Static Configurations
- CLIP_T
- CLIP_S
- Hybrid CLIP_S
- 1483_T
- 1483_S
- Native ATM
- Extender
- RF Design and Planning
- SNMP
- Rupee
- RTFD (Return To Factory Default)
U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
arrival rate from the wireless interface (ATM cells per second).
pcr-tx
{0-70000} Peak Cell Rate, used to define the maximum cells
transmission rate at the wireless interface (ATM cells per second).
Example
The following example sets up a r1483 PVC to an AP from an SU with MID 3.
pvc 0/768 atm25m 70000 70000
5.6 initbridge
5.6.1 spanning
spanning mode
mode
{disable | enable} Currently spanning tree is not supported so
you must choose the disable option.
Example
The following example shows spanning tree disabled. Spanning tree is not supported at
this time.
spanning disable
5.6.2 device add
device add device
device {edd | mr1483 | r1483}
edd = Ethernet interface
mr1483 = multi-port 1483 bridge (AP only)
r1483 = single-port 1483 bridge (SU, Backhaul Master,
Backhaul Slave)
Example
The follow example adds the Ethernet interface to the bridge.
device add edd
March 10, 2003 Company Confidential Page 29 of 149