User's Manual
Table Of Contents
- Revision History
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Document Overview
- AB-Access Overview
- AB-Access Reference Model
- Static Configurations
- CLIP_T
- CLIP_S
- Hybrid CLIP_S
- 1483_T
- 1483_S
- Native ATM
- Extender
- RF Design and Planning
- SNMP
- Rupee
- RTFD (Return To Factory Default)
U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
[root@cs1 /root]# tail -f /var/log/adapcs.log
CS[12801.8192](16Dec 21:39:20.034 ): Protocol: 00 00 00 00 01 00 00 05 00 14 00 04 00 c0 69 0b 58 7f b5 10
CS[12801.8192](16Dec 21:39:20.034 ): RegistrarProtocol: SU 00c0690b587f is already registering
CS[12801.8192](16Dec 21:39:20.555 ): EMSProtocol: received message REGMSG_REGISTER_SU for CS
CS[12801.8192](16Dec 21:39:20.555 ): Protocol: message contents (20 bytes)
2. Make sure the default route is correct if the SU is on a different network than the
Control Server.
3. Verify that the SU has been upgraded to the CLIP_T interactive configuration.
March 10, 2003 Company Confidential Page 37 of 149