User's Manual

U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
9.2.3.2 Can’t ping the radio across the wireless link.
There can be numerous reasons why you can’t ping across the wireless link. After
following these troubleshooting steps and you still can’t ping across the wireless link refer to the
RF troubleshooting document.
1. Check the 1483 processes in the radios. Make sure they are active and have the
correct PVC mapped.
AP (mr1483 command)
192.168.3.9 > mr1483 status 3
Device 3 is active
Active PVC: 768 Active port: atm25m
Pending PVC: 768 Pending port: atm25m
Active devices:
3
1 active in total
SU (r1483 command)
192.168.3.10 > r1483 pvc
Active PVC: 0/768
Active port: atm25m
March 10, 2003 Company Confidential Page 90 of 149