User's Manual
Table Of Contents
- Revision History
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Document Overview
- AB-Access Overview
- AB-Access Reference Model
- Static Configurations
- CLIP_T
- CLIP_S
- Hybrid CLIP_S
- 1483_T
- 1483_S
- Native ATM
- Extender
- RF Design and Planning
- SNMP
- Rupee
- RTFD (Return To Factory Default)
U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
10.1.2 Troubleshooting
10.1.2.1 AP Object
If the AP will not register make sure all the fields in the EMS database are correctly filled
in. Here are a few important points that should be kept in mind if the AP doesn’t register.
1. Make sure the MAC address is correct. Without the correct MAC address the AP
can not register. You can verify what MAC address the AP is attempting to register with by
tailing the adapcs.log file. In the following example an AP is trying to register and is not found in
the database, which means when you created the object it had the wrong MAC address.
[root@cs1 /root]# tail -f /var/log/adapcs.log
CS[5025.8192](16Dec 12:36:03.027 ): AtmAccessPointImpl: Unknown ATM AP 00c0690c522f trying to register
March 10, 2003 Company Confidential Page 93 of 149