User's Manual
Table Of Contents
- Revision History
- PLEASE READ THESE SAFETY PRECAUTIONS!
- Document Overview
- AB-Access Overview
- AB-Access Reference Model
- Static Configurations
- CLIP_T
- CLIP_S
- Hybrid CLIP_S
- 1483_T
- 1483_S
- Native ATM
- Extender
- RF Design and Planning
- SNMP
- Rupee
- RTFD (Return To Factory Default)
U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
10.2 Static 1483_S (routed management)
All assumptions for troubleshooting 1483_S are based on the following diagram.
192.168.100.3
PVC 768
192.168.2.34 /27
192.168.100.1
192.168.2.50 /27
PVC
34
AP Management PVC
RL
BL
SL
A
RL
BL
SL
E
PC
192.168.3.1
MID 0
MID 3
LAN
PVC 769
PVC
300
192.168.3.10
SU Management PVC
SU Data PVC
ATM Switch
Router
10.2.1 Routed Management PRO/CON
1483_S can be configured with switched management or routed management. Read
PRO/CON of both to help you decide which you would like use.
PRO
• Only one ATMARP entry will need to be added to the termination router.
• Can be easier to troubleshoot and isolate a problem in the network.
CON
• Need to add a route and ipatm pvc for every SU that is added to the AP.
• May need to add a route to multiple routers for each SU depending upon network
design.
March 10, 2003 Company Confidential Page 97 of 149