User's Manual
Table Of Contents
- 1.0 Preface
- 2.0 Introduction
- 3.0 Installation
- 3.1 Compliance Alert - Operation in the 3.4 - 3.6 GHz Band
- 3.2 Operation in the 3.650 - 3.675 GHz Band
- 3.3 Installation Warnings
- 3.4 Environmental Cautions
- 3.5 Installing Outdoor Equipment
- 3.6 Installing an Optional Sector Antenna
- 3.7 Installing Optional Omnidirectional Antenna
- 3.8 Installing the Access Point
- 3.9 Power and Data Connections - AC and DC Power Options
- 4.0 Configuring an Access Point for Single-Channel Use
- 5.0 Maintenance Guide
- Appendix A: NIA/Power Adapter Specifications: Model # TR60A-POE-L
- Appendix B: ExcelMax DC PSU/NIA (020-44109-0802)
- Appendix C: Glossary of Terms and Abbreviations
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.4
21
OF 65
3.6.2 Attaching the Sector Antenna to the Mounting Points
1) Observing the correct polarity for the antenna in accordance with the initial RF Site Survey, lay
out the antenna assembly for mounting. Confirm the required polarity against the polarity label
on the back of each antenna assembly.
2) Attach the upper and lower brackets to the antenna. See details A and B.
Figure 3-1: Attach upper and lower brackets
Warning
Do not work on antenna installations of any kind when there is any possibility of
electrical storm activity in the area.
A
B
6X M8 Bolts
and Washers