User's Manual
Table Of Contents
- 1.0 Preface
- 2.0 Introduction
- 3.0 Installation
- 3.1 Compliance Alert - Operation in the 3.4 - 3.6 GHz Band
- 3.2 Operation in the 3.650 - 3.675 GHz Band
- 3.3 Installation Warnings
- 3.4 Environmental Cautions
- 3.5 Installing Outdoor Equipment
- 3.6 Installing an Optional Sector Antenna
- 3.7 Installing Optional Omnidirectional Antenna
- 3.8 Installing the Access Point
- 3.9 Power and Data Connections - AC and DC Power Options
- 4.0 Configuring an Access Point for Single-Channel Use
- 5.0 Maintenance Guide
- Appendix A: NIA/Power Adapter Specifications: Model # TR60A-POE-L
- Appendix B: ExcelMax DC PSU/NIA (020-44109-0802)
- Appendix C: Glossary of Terms and Abbreviations
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.4
31
OF 65
3.7 Installing Optional Omnidirectional Antenna
3.7.1 Grounding the Antenna Mounting
1) Attach the ground lug using the Hex bolt, lock washer and flat washer that came with the
Access Point.
2) Ensure the cable has a good connection. Remove all paint and corrosion where the clamp is
attached.
3) Use dielectric grease on the clamp connection to prevent any electrolysis activity due to
dissimilar metals.
3.7.2 Installing the Omnidirectional Antenna
1) Attach the worm clamps to the omni bracket.
Figure 3-10: Attach worm clamps to Omni bracket
Warning
Do not work on antenna installations of any kind when there is any possibility of
electrical storm activity in the area.