Owner's Manual

If there is no planned route (destination is not selected), the search is carried out around the
current position. If the current position is not available either (no GPS signal), places are searched
around the last known position.
3. Tap any of the quick search buttons to get an instant list of Places.
4. The P
laces in the list can be ordered by their distance from the current or last known position, from
the destination, or by the length of the necessary detour. If you need to reorder the list, tap
.
To filter the list of results by providers, tap
and then the provider logo on the right side of the
screen.
5. (optional) If needed, tap
to further filter the list of results.
6. Browse the list and tap one of the list items. A full screen map appears with the selected point in
the middle. The name and address of the Place is displayed at the top of the screen.
7. Tap
to see the details of the selected Place, or to save the location.
8. If necessary, tap the map somewhere else to modify the destination. The cursor (
) appears
at the new location.
9. Check the settings for road types and change them if necessary.
Tap
to enable or avoid freeways, tap for roads with Period Charge or Per-use Toll, tap
for ferries, or tap for carpool lanes.
10. Tap
to confirm the destination. You can also select a nearby point on the map
or tap
to select a different destination.
37