Installation manual

axxessinterface.com 800.221.0932

USB PORT COVER PROGRAMMING LED

RESET BUTTON

A brief overview of the ASWC interface and wire harness:

On the top of the ASWC interface there are three points of interest:

1)TheProgrammingled–thiswillashrapidlywheninautodetectmode,ashesslowlyinmanual

programming mode

2) The Reset button – Hold down button more then 2 seconds but less then 10 seconds to start auto

detect mode; hold down longer then 10 seconds to start manual programming mode

3) The slide cover for the USB update port – open this up to reveal the USB update port. Using the

USB-CAB update cable and the Axxess website you can make sure you always have the latest,

updated inventory.

Below are the wire colors of the ASWC. Please go to the Axxess website (www.axxessinterface.com)

fordetailedinformationonyourspecicvehicleandwhatcolorwire(s)touseontheASWC.

Pin 1 – Pink

Pin 2 – White/Green

Pin 3 – Orange/Green

Pin 4 – Green/Orange

Pin 5 – Gray/Red

Pin 6 – Black

Pin 7 – Blue/Pink

Pin 8 – Black/Green

Pin 9 – White (Ring of 3.5mm connector)

Pin 10 – Red (Tip of 3.5mm connector)

Pin 11 – Gray/Blue

Pin 12 – Red

Wire Insertion View