Installation manual

axxessinterface.com 800.221.0932
1. Volume Up
2. Volume Down
3. Seek Up/Next
4. Seek Down/Prev
5. Source/Mode
6. Mute
7. Preset Up
8. Preset Down
9. Power
10. Band
11. Play/Enter
12. PTT (Push To Talk)
13. On Hook
14. Off Hook
15. Fan Up
16. Fan Down
17. Temp Up
18. Temp Down
* Note: Remember not all radios will have all these commands. Please refer to the radios’ owners
manualforspeciccommandsrecognizedbytheradio.
7) You can end this half of the programming in 2 ways:
1) After the last button is programmed on your steering wheel (you do not have to go through
the whole list), hold down the Volume Up button for at least 10 seconds. The led will go into
the slow constant blink mode.
Or
2) After the 18th button is programmed or skipped the led will go back to the slow constant blink
mode.
* If at any time you get lost or mess up hold down the reset button on the ASWC for more then 10
seconds.Thiswillrestartthemanualprogramming.Gobacktostep#4andstartagain.
AtthispointyouwillnowbeintheRadioIdenticationmode
8)PressandholdtheVolumeDownbuttonfor5secondstilltheledstartstoashquickly.
9) Release the Volume Down button.