User Manual

ManualsBrandsAxxess ManualsOtherAxxess GMOS-LAN-06 OnStar Interface for Select 2006-2007 Saturn Vehicles

INSTALLATION INSTRUCTIONS FOR PART GMOS-LAN-06

METRA. The World’s best kits.™ metraonline.com1-800-221-0932

REV. 6/18/2014 INSTGMOS-LAN-06

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

• Providesaccessory(12-volt10-amp)

• RetainOnStar

• Highlevelspeakerinput

• Micro“B”USBupdatable

• Retainsbalanceandfade

• RetainsR.A.P.(retainedaccessorypower)

KIT FEATURES

•Cuttingtool•Crimpingtool•Tape•Connectors

(example:butt-connectors,bellcaps,etc.)

TOOLS REQUIRED

Saturn OnStar interface

2006-2007

GMOS-LAN-06

APPLICATIONS

•GMOS-LAN-06Interface•16-pinharnesswith

strippedleads•22-pinto14-pinand16-pin

Saturnharness

INTERFACE COMPONENTS

SATURN

Ion 2006-2007

Vue 2006-2007

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART GMOS-LAN-06 GMOS-LAN-06 Saturn OnStar interface 2006-2007 APPLICATIONS REV. 6/18/2014 INSTGMOS-LAN-06 SATURN Ion Vue 2006-2007 2006-2007 INTERFACE COMPONENTS • GMOS-LAN-06 Interface • 16-pin harness with stripped leads • 22-pin to 14-pin and 16-pin Saturn harness TOOLS REQUIRED • Cutting tool • Crimping tool • Tape • Connectors (example: butt-connectors, bell caps, etc.
PAGE 2
GMOS-LAN-06 Connections to be made From the 16-pin harness: From the 22-pin harness: • Connect the Red wire to the ignition/accessory wire. • The Black/Yellow wire is for OnStar volume adjustment and will be discussed later in this manual. • Connect the White wire to the left front positive speaker wire. • Connect the White/Black wire to the left front negative speaker wire. From the 16-Pin GM harness: • Connect the Gray wire to the right front positive speaker wire.
PAGE 3
GMOS-LAN-06 Installing the GMOS-LAN-06 OnStar level adjustment • With all connections completed to the aftermarket radio, plug the 14 and 16-pin harness into the vehicles wiring harness. • To adjust the OnStar volume level find the Black/Yellow wire on the 12-pin harness. • Reconnect the negative battery terminal. • Push the Blue OnStar button: while the voice is speaking tap the Black/Yellow wire to ground. • Cycle the key, by turning the ignition on for 30 seconds.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART GMOS-LAN-06 IMPORTANT WARNING REV. 6/18/2014 INSTGMOS-LAN-06 This product includes instructions for installation which must be carefully followed. The instructions are worded in such a manner to assume that the installer is capable of completing these type of electronic installations.