User Manual

GMOS-LAN-06
2
From the 16-pin harness:
• ConnecttheRedwiretotheignition/accessorywire.
• ConnecttheWhitewiretotheleftfrontpositivespeakerwire.
• ConnecttheWhite/Blackwiretotheleftfrontnegativespeakerwire.
• ConnecttheGray wiretotherightfrontpositivespeakerwire.
• ConnecttheGray/Black wiretotherightfrontnegativespeakerwire.
• ConnecttheBrown wiretothemutewireoftheaftermarketradio.Iftheradio
hasnomutewire,tapeitoffanddisregardit.
Thefollowingwireswillnotbeusedinthisapplication.Tapethemoff 
anddisregardthem:
• Orange/White
• Blue/Pink
• Green
• Green/Black
• Purple
• Purple/Black
• Plugthe16-pinharnessintotheGMOS-LAN-06interface.
Connections to be made
From the 22-pin harness:
• The Black/Yellow
wireisforOnStarvolumeadjustmentandwillbediscussed
laterinthismanual.
From the 16-Pin GM harness:
• TapeoffanddisregardtheOrange/Whitewire,itwillnotbeusedthis
application.
• ConnecttheGreenwiretotheleftrearpositivespeakerwire.
• ConnecttheGreen/Blackwiretotheleftrearnegativespeakerwire.
• Connectthe Purple wiretotherightrearpositivespeakerwire.
• ConnectthePurple/Blackwiretotherightrearnegativespeakerwire.
From the 14-Pin GM harness:
• ConnecttheYellow wiretothe12voltconstant/batterywire.
• ConnecttheBlack wiretothegroundwire.
• ConnecttheOrange wiretotheilluminationwire.Ifnoilluminationwireis
present,tapeitoffanddisregardit.
• Plugthe22-pinharnessintotheGMOS-LAN-06.