User guide

PERSONAL OPTIONS

AXXESS Standard and Basic Keyset and AXXESSORY Talk Guide

— A prompt tells you what the cascade's current status is. Perform one of the fol-

lowing steps.

• To program a cascade level: Press and enter the number of the level you

wish to program (1-9). You then have the following options:

— To enable or disable the cascade level: Press . (You cannot enable the

level until a notification number is programmed.)

— To set up or change an extension or telephone number: Press . Then

press if it is an extension number OR press if it is an outside

number. Then enter the number.

— To set up or change a pager number: Press . Then enter the number.

• To set up time of day for notification: Press . Then enter the time you

want the message notification start and stop. Enter the times with two digits

for the hour and two digits for the minutes. If entering the time in 12-hour

format, you will be prompted to press for AM or press for PM.

Note If you wish to have 24-hour notification, program the starting and end-

ing times to be the same.

• To set up the days of the week for notification: Press . Then select one

of the following: Press for Monday-Friday, for all days, or to

select individual days. If you selected individual days, you will be prompted

to press digits 1-7 which correspond to the days Sunday through Saturday.

• To select all or priority-only message notification: Press . Then press

for all messages or for priority messages only.

— The list of options returns. Either select another option, as described above, or

press to save the settings and exit.

Fax Destination

To change your Fax Destination Number:

— Enter your mailbox as described on page 38. Then press to select the Personal

Options Menu.

— Press for More Options and then press .

— Enter the number of your fax destination, followed by .

— To accept press . Or, to erase the number and re-enter it press .

1 2

1 2 3

9 1