User guide

MOVING ON

Axxess Standard Display and Basic Digital Phone User Guide

To set up remote messaging:

1. Enter your mailbox as described on page 25.

2. If using version 5.0 or earlier software, skip this step.

If using version 5.1 or higher software, press to select the Personal Options

Menu.

3. Press .

NOTE: This option is not available if you do not have Remote Messaging enabled.

Press to set up a Primary cascade or press to set up an Alternate cascade.

5. Do one of the following.

· To program a cascade level: Press and enter the number of the level you

wish to program (1-9). You then have the following options:

— To enable or disable the cascade level: Press . (You cannot enable the

level until a notification number is programmed.)

— To set up or change an extension or telephone number: Press . Then

press for an extension number or press for an outside number.

Then enter the number.

— To set up or change a pager number: Press . Then enter the number.

· To set up time of day for notification: Press . Then enter the time you

want the message notification to start and stop. Enter the times with two dig-

its for the hour and two digits for the minutes (e.g., 0900 = 9:00). If entering

the time in 12-hour format, you are prompted to press for AM or press

for PM.

NOTE: For 24-hour notification, program the starting and ending times to be

the same.

· To set up the days of the week for notification: Press . Then select one

of the following:

— Press for Monday-Friday.

— Press for all days.

— Press to select individual days. You are prompted to press digits 1-7

which correspond to the days Sunday through Saturday.

· To select all or priority-only message notification: Press . Then press

for all messages or for priority messages only.

6. Either select another option, as described above, or press to save the settings

and exit.

1 2