Quick Start Guide

ManualsBrandsAXXESS ManualsCar Electronics & GPSAXXESS - Car Data Bus Interface for Select Jeep Vehicles - Black

XSVI-6524-BT

INSTALLATION INSTRUCTIONS

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Connections .........................................................2-3

Installation .............................................................3

Programming .........................................................3

App Instructions .................................................4-5

Jeep Renegade 2015-2017 /

Jeep Renegade Sport 2018 Data Interface

• Provides accessory power

(12-volt 10-amp)

• Retains R.A.P. (retained

accessory power)

• Provides NAV outputs (parking

brake, reverse, speed sense)

• Pre-wired ASWC-1 harness

(ASWC-1 sold separately)

• Retains the factory backup

camera

• Designed for non-ampliﬁed

models

• Retains balance and fade

• Retains the factory AUX-IN jack

• Allows retention and

adjustment of the

personalization options

• Adjust personalization

options through a Bluetooth

application

•

Smartphone application

offering full control from either

Android or Apple mobile devices

• Micro-B USB updatable

• XSVI-6524-BT interface

• XSVI-6524-BT harness

• 2-pin CAN harness

Visit AxxessInterfaces.com for more detailed information about the product, and also for

up-to-date vehicle speciﬁc applications

OPTIONAL ACCESSORIES

(sold separately)

Steering wheel control interface: ASWC-1

OBD T-harness: AX-IL-OBD2

Summary of content (8 pages)

PAGE 1
XSVI-6524-BT I N S TA L L AT I O N I N S T R U C T I O N S Jeep Renegade 2015-2017 / Jeep Renegade Sport 2018 Data Interface Visit AxxessInterfaces.com for more detailed information about the product, and also for up-to-date vehicle specific applications INTERFACE FEATURES • Provides accessory power (12-volt 10-amp) • Retains R.A.P.
PAGE 2
CONNECTIONS From the XSVI-6524-BT harness to the aftermarket radio: The following (3) wires are only for multimedia/navigation radios that require these wires. • Connect the Black wire to the ground wire. • Connect the Blue/Pink wire to the VSS/speed sense wire. • Connect the Yellow wire to the battery wire. • Connect the Green/Purple wire to the reverse wire. • Connect the (3) Red wires to the accessory wire. • Connect the Light Green wire to the parking brake wire.
PAGE 3
CONNECTIONS (CONT.) CAN connections to the vehicle: • Disconnect the 2-pin connector from the XSVI-6524-BT harness. • Connect the 2-pin CAN harness to the XSVI-6524-BT harness. • Route the harness to the vehicles OBD port located under the driver’s side dash. INSTALLATION With the key in the off position: 1. Connect the XSVI-6524-BT harness to the XSVI-6524-BT interface, and then to the wiring harness in the vehicle. 2.
PAGE 4
APP INSTRUCTIONS 1. Download and install the AX-CUSTOM-BT app from the Android/Apple mobile devices app store. 2. Start the vehicle. 3. Open the app and wait for the Customization Settings menu to appear.If Not Connected appears instead, first press the right button in the top right corner of the screen, then press the left button. This will take you back to Customization Settings. The pairing process will begin at this point. 4. Once paired, Settings will be displayed in the screen.
PAGE 5
APP INSTRUCTIONS (CONT.) Other Options Manage Vehicles (Figure B) • Select Manage Vehicles by pressing the button in the top right of the screen. • Pressing either the Add Vehicle or Edit (pencil icon) button will open the Configure Vehicle menu. Configure Vehicle (Figure C) • The name of the vehicle can be changed by pressing the text field. • The app can automatically detect the interface in the vehicle by pressing the Search button (magnifying glass).
PAGE 6
PAGE 7
REV.
PAGE 8
XSVI-6524-BT I N S TA L L AT I O N I N S T R U C T I O N S If you are having difficulties with the installation of this product, contact our Tech Support line either by phone at 1-800-253-TECH, or email at techsupport@metra-autosound.com. Before doing so, look over the instruction booklet a second time and ensure that the installation was performed exactly as the instruction booklet is stated. Have the vehicle apart and ready to perform troubleshooting steps before contacting Metra/Axxess Tech Support.