Owner`s manual

lqllll?'lllqli _
Connect one of the type of the audio jack(s) and/or video jack(s) that your input components are equipped with.
Audio jacks and cable plugs Video jacks and cable plugs
AUDIO DIGITAL AUDIO DIGITALAUDIO
@ (_ COAXIAL OPTICAL
@@@ ID
(White) (Red) (Orange)
t 1' t t
Left and right Coaxial Optical
analog audio digital audio digital
cable plugs cable plug audio cable
plug
COMPONENT VIDEO
VIDEO PR PB Y
@ @@@
(Yellow) (Red) (Blue) (Green)
t t t t
Composite Component
video cable video cable
plug plugs
• Audio jacks
This unit has three types of audio jacks. Connection
depends on the availability of audio jacks on your other
components.
AUDIO jacks
For conventional analog audio signals transmitted via left
and right analog audio cables. Connect red plugs to the
right jacks and white plugs to the left jacks.
DIGITAL AUDIO COAXIAL jacks
For digital audio signals transmitted via coaxial digital
audio cables.
DIGITAL AUDIO OPTICAL jacks
For digital audio signals transmitted via optical digital
audio cables.
• You call use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. Optical input jacks are compatible with digital
signals with up to 96 kHz of sampling frequency.
• This unit handles digital and analog signals independently. Thus
audio signals input at the digital jacks are not output at the
analog AUDIO OUT (REC) jacks.
• Video jacks
This unit has two types of video jacks. Connection
depends on the availability of input jacks on your video
monitor.
VIDEO jacks
For conventional composite vide() signals transmitted via
composite video cables.
COMPONENT VIDEO jacks
For component signals, separated into the luminance (Y)
and chrominance (PB, PR) video signals transmitted on
separate wires of component video cables.
Video signal flow for MONITOR OUT
Output
Input (MONITOR OUT)
COMPONENT PR PB Y PR PB Y
V,DEO @@@ .@@@
VIDEO @ . @
The OSD signal is not output at the DVR OUT (REC) jacks.
/
13 En