Owner`s manual

i_i,lllll:l'l_l,lll -

Connect the audio components as follows.

• Connecting a CD player and a CD

recorder/MD recorder

• When you connect your CD player via analog and digital

connection, priority is given to the signal input at the DIGITAL

INPUT jack.

• To make a digital connection to a component other than the

default component assigned to each DIGITAL INPUT jack,

select the corresponding setting in "INPUT ASSIGNMENT"

(see page 68).

Make sure that this unit and other

components are unplugged from the

AC wall outlets.

indicates recommended connections

........ indicates alternative connections

CD recorder or

MD recorder

Audio out CD player

• Connecting a multi-format player or an external decoder

This unit is equipped with 6 additional input jacks (FRONT L/R, SURROUND L/R, CENTER and SUBWOOFER) for

discrete multi-channel input from a multi-format player, external decoder or sound processor. Connect the output jacks

on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right

output jacks to the left and right input jacks for the front and surround channels.

• When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 34), this unit automatically

turns off the digital sound field processor, and you cannot select sound field programs.

• This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that

you connect a 5.l-channel speaker system before using this feature.

k a _Ik al i _ 1

Multi-format player/

External decoder

18 En