Owner`s manual

You can display the operating information of this unit on a
video monitor.
1 Turn on the video monitor connected to this
unit.
2 Press _DISPLAY.
The current status screen appears in the OSD.
i_r'rlv,7;r4:
:!!;7gIT{.IS U0L: -'4@dB
OUO M,>..deUiewir,g
MOUIE
_i{=rSE[. _ HO{r!l
NII]i.{[: CIi'_liMg (MID;=
l[.[ ,11 .,, io f..,_ :> OFF
You can select the amount of time that the current status is
displayed in the OSD by using the "OSD-AMP" parameter in
"OPTION MENU" (see page 70).
The OSD signal is not output at the DVR VIDEO OUT jacks and
will not be recorded.
Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
When you select a sound field program, SILENT CINEMA mode
is automatically activated (see page 39).
• When you connect headphones, no signals are output at the
speaker terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.
Press (_MUTE to mute the audio output. Press
(_MUTE again to resume the audio output.
• You can also rotate (])VOLUME or press @VOLUME +/- to
resume the audio output.
• You can adjust the muting level by using the "MUTE TYPE"
parameter in "SOUND MENU" (see page 66).
• The MUTE indicator flashes in the front panel display when the
audio output is muted and disappears from the front panel
display when the audio output is resumed.
35 En