Owner`s manual

lumq,_i
• Audio information
You can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
Press the input selector buttons (@) control to
select a video source and then an audio source.
Audio sources
Video sources
F0{::4'.M{:::{] Signal format. When this unit cannot detect a
digital signal, it autonaatically switches to
analog input.
'.iii;{:::{{"{{:::'{....][ {"{G The mnnber of samples per second taken from
a continuous signal to make a discrete signal.
(]:HIZI{".{{".{EL The number of source channels in the input
signal (front/surround/LFE). For example, a
multi-channel soundtrack with 3 front
channels, 2 surround channels and LFE, is
displayed as "31210.1".
[:.i:]]]"{::4'.1:::1]"[.. The number of bits passing a given point per
second.
FLlZ{(iii Flag data encoded in DTS, Dolby Digital, or
PCM signals that cue this unit to automatically
switch decoders.
• You can also select "MULTI CH" as the audio source (see
page 34), Press @AMP and then press @MULTI CH IN,
• Set the "BGV" parameter in the "MULTI CH SET" menu to the
desired setting to select the default background video input
source of the MULTI CH INPUT sources (see page 69),
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.
1 Press @AMP and then @MENU.
The top "SET MENU" display appears in the OSD.
---" appears when this unit cannot display the corresponding
information.
• Video information
2
3
SET _1Ei'_U
]-OF' _'11ii,.ll..I
,i, , _:ILITO SF]'LIF'
, :;ISN¢IL INFO
[A] , ["F] 1;I..ll;:,, [:_,::,J.,._t,
[ EI.I-I'E{z_:] : Er&er
Press @V repeatedly to select "SIGNAL
INFO" and then press @ENTER.
The audio information about the input source appears
in the OSD.
Press @<:1/b> to toggle between the audio
and video information displays.
1"11][:'1"1][ :iii;][(iii{"{!:::!LType of the source video signals and the
video signals output at the HDMI OUT
jack of this unit.
{...{[:,{v{[[ {:'4'.E'}.:,,, Resolution of the HDMI signals input or
output at the HDMI IN/OUT jacks of this
unit.
{"{[:'i"i]] [ii]:;;2i:42i]){:4: Error message for HDMI sources or
(Only when error connected HDMI devices. See "HDMI
is detected) error and message" t_r details.
---" appears when this unit cannot display the corresponding
information.
HDMI error and message
[:,EU ]](.]:E 0UER The number of the connected HDMI
components is over the limit.
{"{[:'i]]:F' E{:;?,{:;?,i]){:;?.HDCP authentication failed.
()U]" ()F {:4'.E'.i.:,,, The connected monitor is not compatible
with the resolution of the input video signal.
4 Press (_MENU againto exitfrom "SET
MENU".
36 En